RXi2-BP Hardware Reference Manual
Section 6
GFK-3187B
November 2020
Troubleshooting
18
5.4
Change M.2 Mass Storage Device
NOTICE
The information described in this section applies to service technicians only.
The M.2 mass storage devices are by standard a 2242 form factor and can be replaced with the same
form factor without any changes. If other form factors are required, please contact Emerson support for
instructions on how to move the mounting nut.
WARNING
Verify that the power supply is turned off while installing boards or modules into the RXi2-BP IPC.
1.
To remove the cover, follow instructions in Section 5.1
2.
Locate M.2 mass storage and unscrew the Tx 8 screw (Figure 13).
Figure 13: Populated M.2 Mass Storage
Note: Red gap pads on the M.2 storage must be re-used.
