RXi2-BP Hardware Reference Manual
Section 6
GFK-3187B
November 2020
Troubleshooting
17
5.3
Inserting and removal of µSD Card
1.
Unscrew µSD card lid with Tx 8 screwdriver until µSD opening is accessible.
2.
Inserting µSD card into the opening (Figure 10).
Figure 10: Inserted µSD card before plugging in
3.
Plug-in µSD card until you hear a click. The populated connector is a push-push connector
(Figure 11).
Figure 11: Plugged in µSD card
4.
Re-attach the lid and tighten the screw to 0.45 Nm (Figure 12).
Figure 12: Close µSD card lid
5.
To remove the µSD card, remove the lid first and push it carefully in the same direction as step
3, the µSD card will pop out slightly and can then be removed.
