Emerson Rosemount Smart Wireless THUM, Reference Manual

Page: 38 / 60

Reference Manual
00809-0100-4075, Rev BA
October 2010
Smart Wireless THUM Adapter
4-4
AMS Wireless Configurator
When the device has joined the network, it will appear in the Wireless
Configurator as illustrated below.
Troubleshooting
If the device is not operating properly, refer to the troubleshooting section of
the manual. The most common cause of incorrect operation is the Network ID
and Join Key. The Network ID and Join Key in the device must match that of
the Smart Wireless Gateway.
The Network ID and Join Key may be obtained from the Smart Wireless
Gateway on the
Setup>Network>Settings page on the web server. The
Network ID and Join Key may be changed in the wireless device by using the
following Fast Key sequence.
Reference Information
NOTE
In order to communicate with a Field Communicator, the wired device must be
powered.
Table 4-1. THUM Adapter
HART Fast Key Sequence
Function Key Sequence Menu Items
Wireless Setup 1, 4 Smart Power, Network ID, Set Join
Key,
Radio State
Function
Key
Sequence Menu Items
Device Info 2, 2, 4, 3 Manufacturer, Model, Final Assembly Number,
Universal, Field Device, Software, Hardware,
Descriptor, Message, Date, Model Number I, II,
III, SI Unit Restriction, Country
Guided Setup 2, 1 Configure, Guided Setup, Join Device to
Network, Configure Update Rate, Zero Trim,
Configure Device Display, Configure Process
Alarms
Manual Setup 2, 2 Configure, Manual Setup, Wireless, Pressure,
Device Temperatures, Device Information,
Display, Other
Wireless 2, 2, 1 Network ID, Join Device to Network, Configure
Update Rate, Configure Broadcast Power Level,
Power Mode, Power Source