Emerson Rosemount Smart Wireless THUM, Reference Manual

Page: 36 / 60

Reference Manual
00809-0100-4075, Rev BA
October 2010
Smart Wireless THUM Adapter
4-2
DEVICE NETWORK
CONFIGURATION
In order to communicate with the Smart Wireless Gateway, and ultimately the
Information System, the transmitter must be configured to communicate with
the wireless network. This step is the wireless equivalent of connecting wires
from a transmitter to the information system. Using a Field Communicator or
AMS, enter the Network ID and Join Key so that they match the
Network ID
and Join Key of the gateway and other devices in the network. If the Network
ID and Join Key are not identical, the THUM Adapter will not communicate
with the network. The Network ID and Join Key may be obtained from the
Smart Wireless Gateway on the
Setup>Network>Settings page on the web
server, shown in Figure 4-1.
Figure 4-1. Gateway Network
Settings
AMS
Right click on the THUM Adapter and select Configure . When the menu
opens, select Join Device to Network and follow the method to enter the
Network ID and Join Key.
Field Communicator
The Network ID and Join Key may be changed in the wireless device by using
the following Fast Key sequence. Set both Network ID and Join Key.
Operation can be verified in three locations: by using the Field Communicator,
at the Gateway via the Smart Wireless Gateway’s integrated web server, or
via AMS
™
Wireless Configurator.
Function Key Sequence Menu Items
Wireless Setup 1,4 Smart Power, Network ID, Set Join
Key,
Radio State