Emerson Rosemount Smart Wireless THUM Reference Manual Download Page 37 | Manualshive

Page: 37 / 60

background image

Reference Manual

00809-0100-4075, Rev BA
October 2010

4-3

Smart Wireless THUM Adapter

Network Status

If the THUM Adapter was configured with the Network ID and Join Key and
sufficient time for network polling has passed, the transmitter should be
connected to the network. To verify connectivity, open the Smart Wireless
Gateway’s integral web interface and navigate to the Explorer page.

This page will display the THUM Adapter's HART tag, PV, SV, TV, QV, and
Update Rate. A green status indicator means that the device is working
properly. A red indicator means that there is a problem with either the device
or its communication path. For more detail on a specific device, click on the
tag name.

Verify Operation

Operation can be verified in three locations: by using the 375 Field
Communicator, at the Gateway via the Smart Wireless Gateway’s integrated
web server, or via AMS™ Wireless Configurator.

Field Communicator

In order for the THUM adapter to communicate with a Field Communicator, a
THUM adapter DD is required. The Field Communicator must be put into a
polling mode using the THUM adapter address of 63. Connect the Field
Communicator to the wired device. The Field Communicator should find both
the THUM adapter and the wired device.

Field Communicator Connections

Smart Wireless Gateway

If the THUM Adapter was configured with the Network ID and Join Key, and
sufficient time has passed for network polling, the transmitter will be
connected to the network. To verify device operation and connection to the
network with the Smart Wireless Gateway’s integrated web server, open the
Smart Wireless Gateway’s integral web interface and navigate to the

Explorer

page.

NOTE:

It may take several minutes for the device to join the network.

Function

Key Sequence

Menu Items

Communications

3, 3

Join Status, Wireless Mode, Join Mode,
Number of Available Neighbors, Number of
Advertisements Heard, Number of Join
Attempts

«
...
35
36
37
38
39
...
»

Summary of Contents for Rosemount Smart Wireless THUM





























































Reviews:

No comments

Related manuals for Rosemount Smart Wireless THUM

Brand: Radio Shack Pages: 1

Brand: Planet Pages: 2

Brand: StarTech.com Pages: 18

Brand: Inateck Pages: 26

Brand: IFM Pages: 10

Brand: Cognex Pages: 18

Brand: Daikin Pages: 36

Brand: StarTech.com Pages: 2

Brand: Allen-Bradley Pages: 24

Brand: MSI Pages: 53

Brand: GodEngine Pages: 76

Brand: Mitsubishi Pages: 250

Brand: OBDLink Pages: 12

INSYS Pocket ISDN-TA

Brand: Siemens Pages: 44

Brand: Siemens Pages: 4

Brand: Siemens Pages: 4

Brand: Siemens Pages: 4

Brand: Siemens Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands