Emerson Rosemount 928, Reference Manual, Page: 187 / 204

B Product certifications
Rev 3.3
B.1 European Directive information
The most recent revision of the EC Declaration of Conformity can be found at
www.Emerson.com/Rosemount under Documentation .
B.2 Telecommunication compliance
All wireless devices require certification to ensure that they adhere to regulations
regarding the use of the RF spectrum. Nearly every country requires this type of product
certification. Emerson is working with governmental agencies around the world to supply
fully compliant products and remove the risk of violating country directives or laws
governing wireless device usage.
B.3 FCC and IC
This device complies with Part 15 of the FCC rules. Operation is subject to the following
conditions: This device may not cause harmful interference. This device must accept any
interference received, including interference that may cause undesired operation. This
device must be installed to ensure a minimum antenna separation distance of 7.81 in. (20
cm) from all persons.
B.4 Ordinary location certification
As standard, the transmitter has been examined and tested to determine that the design
meets basic electrical, mechanical, and fire protection requirements by a nationally
recognized testing laboratory (NRTL) as accredited by the Federal Occupational Safety and
Health Administration (OSHA).
B.5 Installing in North America
The US National Electrical Code
®
(NEC) and the Canadian Electrical Code (CEC) permit the
use of Division-marked equipment in Zones and Zone-marked equipment in Divisions. The
markings must be suitable for the area classification, gas, and temperature class. This
information is clearly defined in the respective codes.
B.6 USA
I5 U.S.A. Intrinsically Safe (IS)
Certificate CSA 70138122
Reference Manual Product certifications
00809-0100-4928 September 2019
Rosemount 928 187