44
Reference Manual
00809-0100-4570, Rev DA
Operation
November 2017
Operation
7.1.3
System requirements
Refer to Rosemount 5708
for the Software Installation requirements for the server and
client.
7.1.4
Network considerations
When installing the Rosemount 3DVision Clients and Servers in a secured network or when it is needed
to access the Rosemount 3DVision Server from an external connection (WAN – Wide Area Network) it is
required to open TCP Ports in Firewalls, Routers or other devices or applications that might block such
communication.
The required TCP Ports are:
22220 – Control Port
22221 – Used for data Connection
22222 – Connection of Rosemount 3DVision Client to Server
22223 – Logs Download Data Port
Additional TCP ports may be required when integrating the 3DVision to SCADA/DCS system using
Modbus communication protocol. See
Server options - SCADA Configuration, and
.
Summary of Contents for Rosemount 5708
