Emerson Rosemount 5708 Reference Manual Download Page 63

Page: 63 / 204

Reference Manual

00809-0100-4570, Rev DA

Operation

November 2017

Operation

3. Define the user names, passwords, and permission levels of the various user accounts prior to setting

up projects in the system. At least one user account must have the administrator permission level. For
further details, refer to

“Users Management…” on page 74

Note

To log in to the technician mode of the system, enter the technician mode user name and password. For
further details, refer to

“Switch User…” on page 74

4. The server application may need some time to initialize communications with the Rosemount 5708

and clients. Ensure the server icon appears on the task bar as shown.

The server should remain running. Manually running the server is required only if the computer is
restarted and the server does not start automatically.

When installing the server, it is added to the Microsoft Windows Start Up files automatically.

Summary of Contents for Rosemount 5708













































































































































































































Search results

Summary of Contents for Rosemount 5708

Reviews:

Related manuals for Rosemount 5708

Brands by name

Popular brands

Emerson Rosemount 5708, Reference Manual

Search results

Summary of Contents for Rosemount 5708

Reviews:

Related manuals for Rosemount 5708

Brands by name

Popular brands