Emerson Rosemount 3095, Reference Manual, Page: 64 / 130

Reference Manual
00809-0100-4716, Rev JA
May 2008
Rosemount 3095 MultiVariable
3-34
HART
Figure 3-29. 3095 Engineering
Assistant Menu Structure.
Basic Navigation File Menu
“New” starts with a fresh configuration file. This should be selected before
import and opening a file.
“Open” lets you open a previously saved configuration file.
“Save” and “Save as” lets you save the current configuration file. You can
save a created configuration while in off-line that can be imported to a 3095
when in on-line mode.
“Reports” will print or save the transmitter, primary element, fluid, and natural
gas reports. The transmitter report is only available when a 3095 is on-line.
View Menu
Select “Toolbar” to show or hide the toolbar.
Select “Status Bar” to show or hide the status bar.
Configure Menu
“Configure Flow…” launches the Flow Configuration Wizard.
“Options” enables or disables password usage. The security must be enabled
before the password screen can be accessed.
The “Import…” link imports previous versions of 3095 Flow Configuration files.
Only EA Mass Flow (*.mfl) files can be imported. The flow configuration
wizard automatically opens, and the file is imported to the current file format.
The “Preferences” link is used to switch between US or SI/Metric Units for
flow configuration. Default units are applied to all new configurations, not the
current configuration. To start a new configuration, Click “File” from the
menubar and select “New”.