Emerson Rosemount 2051, Reference Manual

Page: 27 / 228

17
Reference Manual
00809-0100-4107, Rev BA
Section 2: Configure
April 2013
Configuration
Entering range points with a Local Operator Interface
Reference Figure 2-8 on page 17 to rerange the transmitter using the Local Operator Interface.
Enter values using SCROLL and ENTER buttons.
Figure 2-8. Rerange with LOI
Rerange the transmitter with applied pressure source
Reranging using an applied pressure source is a way of reranging the transmitter without
entering specific 4 and 20 mA (1-5 Vdc) points.
Rerange with an applied pressure source using a Field Communicator
Rerange with an applied pressure source using AMS Device Manager
Right click on the device, select Configure .
1. Select the Analog Output tab.
2. Click Range by Applying Pressure button and follow the screen prompts range the
transmitter.
Rerange with an applied pressure source using a Field Communicator
Use Figure 2-9 to manually rerange the device using an applied pressure source with an LOI.
Figure 2-9. Rerange with applied pressure using LOI
From the HOME screen, enter the fast key sequence
Device Dashboard Fast Keys
2, 2, 2, 2
RERANGE
ENTER VALUES ENTER VALUES
APPLY VALUES
BACK TO MENU
EXIT MENU
ENTER VALUES
LRV
URV
BACK TO MENU
EXIT MENU
VIEW CONFIG
ZERO TRIM
UNITS
RERANGE RERANGE
LOOP TEST
DISPLAY
EXTENDED MENU
EXIT MENU
RERANGE
ENTER VALUES
APPLY VALUES APPLY VALUES
BACK TO MENU
EXIT MENU
APPLY VALUES
LRV
URV
BACK TO MENU
EXIT MENU
VIEW CONFIG
ZERO TRIM
UNITS
RERANGE RERANGE
LOOP TEST
DISPLAY
EXTENDED MENU
EXIT MENU