manualshive.com logo in svg

Emerson Rosemount 2051, Reference Manual

The Emerson Rosemount 2051 is a powerful and versatile pressure transmitter designed for accurate and reliable measurement. Our Quick Installation Manual provides step-by-step instructions for effortless set up. Download the manual for free at manualshive.com and gain access to all the essential information needed to maximize the performance of this exceptional product.

Share
Download
background image

136

Reference Manual

00809-0100-4107, Rev BA

Appendix A: Specifications and Reference Data

April 2013

Appendix A: Specifications and Reference Data

Material Traceability Certification

Standard

Standard

Q8

Material Traceability Certification per EN 10204 3.1.B

★

Quality Certification for Safety

Standard

Standard

QS

(12)

Prior-use certificate of FMEDA data

★

QT

(12)

Safety Certified to IEC 61508 with certificate of FMEDA

★

Surface Finish

Standard

Standard

Q16

Surface finish certification for sanitary remote seals

★

Toolkit Total System Performance Reports

Standard

Standard

QZ

Remote Seal System Performance Calculation Report

★

Conduit Electrical Connector

Standard

Standard

GE

M12, 4-pin, Male Connector (eurofast

®

)

★

GM

A size Mini, 4-pin, Male Connector (minifast

®

)

★

HART Revision Configuration

Standard

Standard

HR5

(7)

(15)

Configured for HART Revision 5

★

HR7

(7)

(16)

Configured for HART Revision 7

★

Typical Model 
Number: 

2051T G 3 A 2B   2  1 A B4 M5

(1)HART Revision 5 is the default HART output. The Rosemount 2051 with Selectable HART can be factory or field configured to HART 
Revision 7. To order HART Revision 7 factory configured, add option code HR7.
(2)Materials of Construction comply with recommendations per NACE MR0175/ISO 15156 for sour oil field production environments. 
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for 
sour refining environments.
(3)Not available with Low Power output code M.
(4)“Assemble-to” items are specified separately and require a completed model number.
(5)Not available with coned and threaded connection (2F code), assemble-to manifold (S5 code), assemble-to seal (S1 code), surface finish 
certification (Q16 code), remote seal system report (QZ code).
(6)Not available with FOUNDATION fieldbus output code F.
(7)Only Available with HART 4-20 mA (output codes A and M).
(8)Transmitter is shipped with 316 SST conduit plug (uninstalled) in place of standard carbon steel conduit plug.
(9)The V5 option is not needed with the T1 option; external ground screw assembly is included with the T1 option.
(10)Available with 4-20 mA HART output code A, FOUNDATION fieldbus output code F, 2051C Ranges 2-5 or 2051T Ranges 1-4, SST 
diaphragms and silicone fill fluid. High Performance Option includes 0.05% Reference Accuracy, 5 year stability and improved ambient 
temperature effect specifications. See Performance Specifications for details.
(11)The T1 option is not needed with FISCO Product Certifications; transient protection is included in the FISCO product certification codes 
IA and IE.
(12)Only available with HART 4-20 mA output (output code A).
(13)NAMUR-Compliant operation is pre-set at the factory and cannot be changed to standard operation in the field.
(14)Not valid with Alternate Process Connection S5.
(15)Configures the HART output to HART Revision 5.  The device can be field configured to HART Revision 7 if needed.
(16)Configures the HART output to HART Revision 7.  The device can be field configured to HART Revision 5 if needed.

 Table 13. Rosemount 2051T In-Line Pressure Transmitter Ordering Information

★ 

The Standard offering represents the most common options. The starred options (

★

) should be selected for best delivery.

__

The Expanded offering is subject to additional delivery lead time.

Summary of Contents for Rosemount 2051





































































































































































































































Reviews:

No comments

Related manuals for Rosemount 2051

Callaway 200 S Manual preview
200 S
Brand: Callaway Pages: 11
National Instruments NI 9421 Getting Started Manual preview
NI 9421
Brand: National Instruments Pages: 18
Ulvac SPU Instruction Manual preview
SPU
Brand: Ulvac Pages: 24
MULTISPAN AMP-19N Operating Manual preview
AMP-19N
Brand: MULTISPAN Pages: 2
Macnaught IM012E Instruction Manual preview
IM012E
Brand: Macnaught Pages: 8
PCB Piezotronics 356A03 Installation And Operating Manual preview
356A03
Brand: PCB Piezotronics Pages: 16
Spectrum Techniques fieldscout TDR 100 Product Manual preview
fieldscout TDR 100
Brand: Spectrum Techniques Pages: 20
Sper scientific 860031 Instruction Manual preview
860031
Brand: Sper scientific Pages: 56
Power Measurement ION 7700 Instructions Manual preview
ION 7700
Brand: Power Measurement Pages: 20
BYK micro-TRI-gloss ? Operating Instructions Manual preview
micro-TRI-gloss ?
Brand: BYK Pages: 174
Parker BD15 Series Installation And Service Manual preview
BD15 Series
Brand: Parker Pages: 16
Waterproof W1 5mm User Manual preview
W1 5mm
Brand: Waterproof Pages: 51
Oakton WD-35606-00, WD-35606-05 Operating Instructions Manual preview
WD-35606-00, WD-35606-05
Brand: Oakton Pages: 10
Fuji Electric ZRE-2 Instruction Manual preview
ZRE-2
Brand: Fuji Electric Pages: 85
XS Scuba VX200-N-VI Series Service Manual preview
VX200-N-VI Series
Brand: XS Scuba Pages: 34
Halo Photonics Stream Line Pro Hardware And Software Manual preview
Stream Line Pro
Brand: Halo Photonics Pages: 45
Dive Perfect Stubby LED-1500 User Manual preview
Stubby LED-1500
Brand: Dive Perfect Pages: 4
PCE Instruments PCE-VT 1000 Manual preview
PCE-VT 1000
Brand: PCE Instruments Pages: 6

Brands by name

Popular brands

Load more brands