76 Chapter 5 Use Of Monitoring Module M800D
Table 1.1 Contents of M800D MIB
Ident group
M800D ident group
R/W
*
identManufacturer
The name of the equipment manufacturer
R
identModel
The manufacturers model designation of the power system
R
identControllerFirmwareVersion
The firmware (software) version of the controller
R
identName
The name of the power plant. This object should be set by the administrator
R/W
System Group
M800D system value group
systemStatus
Status of the complete plant (highest alarm). One of
(1) unknown – status has not yet been defined
(2) normal – there are no activated alarms
(3) warning – OA, lowest level of ‘abnormal’ status
(4) minor – A3
(5) major – MA
(6) critical – CA, highest level of ‘abnormal’ status
(7) unmanaged
(8) restricted
(9) testing
(10) disabled
R
systemVoltage
System voltage, stored as mV
R
systemCurrent
System current, stored as Ma
R
systemUsedCapacity
Used capacity, stored as % of the total capacity
R
psStatusCommunication
The status of communication with the Power System
(1) unknown,
(2) normal,
(3) interrupt indicates some errors occurred between Power System and agent
psStatusBatteryMode
The status of battery modes,
(1) unknown
(2) FloatCharging,
(3) ShortTest,
(4) BoostChargingForTest
(5) ManualTesting, (6) PlanTesting, (7) ACFailTesting,
(8) ACFail,
(9) ManualBoostCharging, (10)AutoBoostCharging,
(11)CyclicBoostCharging,
(12)MasterBoostCharging,
(13)MasterBatteryTesting
SM series group
Power system battery group
psSMACNumber
The number of SM AC module
R
psSMBATNumber
The number of SM BAT module
R
psSMIONumber
The number of SM IO module
R
psInput group
Power system input group
psInputLineAVoltage
The AC line A voltage, stored as mV
R
psInputLineBVoltage
The AC line B voltage, stored as mV
R
psInputLineCVoltage
The AC line C voltage, stored as mV
R
psTemperature Group
Power system temperature group
psTemperature1
The first route temperature, stored as 0.001 Celsius degree
R
psTemperature2
The second route temperature, stored as 0.001 Celsius degree
R
alarm trap Group
M800D alarm trap Group
alarmLastTrapNo
The sequence number of last submitted alarm trap
R
alarmTrapTable
(alarmTrapEntry)
Table holding information about the submitted alarm traps. AlarmTrapEntry is the
entry (conceptual row) in the alarmTrapTable
R
alarmTrapNo
The unique sequence number of this alarm trap
R
alarmTime
Date and time when event occured (local time), including timezone if supported by
controller
R
alarmStatusChange
The type of alarm change. One of
(1) activated
(2) deactivated
R
alarmSeverity
The severity of the alarm. One of
(3) warning – O1, lowest level of alarm severity
(4) minor – A3
(5) major – A2
(6) critical – A1, highest level of alarm severity
R
alarmDescription
Free-text description of alarm
R
alarmType
Alarm type, i.e. an integer specifying the type of alarm
Traps
Alarm traps info
The SNMP agent can send the active alarms to the specified NMSs and the user
can define the lowest severity of the NMS accepted alarms
NetSure 501 A50, NetSure 501 AA0, NetSure 701 A51 19-Inch Subrack Power Supply System User Manual
