40 Chapter 5 Use Of Monitoring Module M800D
History Alarm
Observation: 2
Major: 2
Critical: 2
In the preceding screen, press ENT to view the detailed history alarm information and one screen only displays one
alarm:
001 Diesel Group
Diesel Test
050610 15:13:16
050610 16:17:20
In the preceding screen, “050610 15:13:16” is the start time of the alarm and “050610 16:17:20” is the end time of
the alarm.
5.2.4 Maintain
In the screen of Main Menu, press ▲ or ▼ to select the sub-menu of “Maintain”, and press ENT to activate the menu,
following screen pops up:
Select User
admin
Enter Password
*
If the user has selected the user (default user: “admin”) and entered the password (default password: “1”) to set the
parameters, and if the user and password are still active, he can directly implement the “Maintain” operation.
Otherwise he has to select the user and enter the password again. See
for the methods of selecting of
user and password entry.
The Maintain screen is shown as follows:
Maintain
ACU System
Rect Group
Rectifier
If the equipment category has more than one piece of equipment, the detailed equipment information will be
displayed in two-level menus. For example, the rectifier information is displayed in two-level menus. In the preceding
screen, select the sub-menu of “Rectifier” and press ENT to display the first level:
Rectifier
Rectifier 1
Rectifier 3
Rectifier 2
In the preceding screen, select a rectifier, for example, select Rectifier1, and press ENT to display the detailed
information (signals) of the rectifier:
Second-level:
Rect DC Ctrl
Off
Rect AC Ctrl
Off
Rect AC Ctrl
Off
Rect Reset
Off
Control Method:
NetSure 501 A50, NetSure 501 AA0, NetSure 701 A51 19-Inch Subrack Power Supply System User Manual
