background image

Monitor and Control Functions - Web Only

38

8.3

Event Log

The Event Log tab allows viewing events stored in the Web card’s history. This history is gathered 

only when the Web card is installed and communicating properly with the device. The history is 

stored in descending chronological order; Page 1 Item 1 contains the most recent event.
The list of events includes:
1. The time and date of the event—This is either the local time and date (if the network time 

synchronization is working properly) or the time-delta from when the card was first powered on (if 

no network time synchronization has taken place).

2. The event ID—This is the index number given to events since the start of the history.
3. The event text—Text stating the type of event and how the card reacted.

Event Log Controls

<<-: Scroll immediately to Page 1 of the history
<-: Scroll left one page in the history
->: Scroll right one page in the history
->>: Scroll immediately to the last page of the history

Links

Agent Event Log at the top of the page includes two links, (.txt) and (.csv). The Txt link will download 

the entire event history in unformatted text. The CSV link will download the entire event history in 

comma-separated format, which can then be imported into an application such as Microsoft Excel

®

.

Scroll through 

Event Log

Event Log tab

Summary of Contents for Liebert IntelliSlot IS-WEB485ADPT





























































Reviews: