Emerson Liebert IntelliSlot IS-WEB485ADPT, Installation Manual

Page: 15 / 60

System Information
11
4.0 S
YSTEM
I
NFORMATION
System Information is optional and identifies the Liebert unit, its
location, a contact person and other information about the unit. The
default value of each field is “Uninitialized.”
Terminal Emulation (Serial or TCP/IP Connection) / Telnet
To edit any field in this category:
1. From the Main Menu, choose
System Information .
2. Enter the number that corresponds to your choice, then enter the identifying information, using
the following as a guide.
Web Interface
To access System Information through the Web interface:
• Click on the Configure tab, then Agent Info in the left panel and finally Edit in the right panel.
After making changes, click Save .
NOTE
This information also configures the SNMP parameters
sysName, sysContact, sysDescr, and sysLocation available
using RFC-1213 MIB II.
Table 7 System information identifiers
Item Description Maximum Length
Name A name for the Liebert unit 255 characters*
Contact
A contact person or department responsible
for maintenance and operation of the Liebert unit
64 characters*
Location The location of the Liebert unit 64 characters*
Description
Other useful information about the unit
for quick reference
64 characters*
* Valid characters include spaces and other printable characters except double quotes (").
System Information Menu
------------------------
1: Name Uninitialized
2: Contact Uninitialized
3: Location Uninitialized
4: Description Uninitialized
<ESC>: Cancel menu level
Please select a key ?>
Agent
Info
Edit
Configure tab