User Manual
Chapter 3
GFK-2849A
Oct 2019
Configuration
51
13.
In the dialogue box <server name> RCB Assignment, click OK to close. On closure of
the IEC 61850 Configurator, required PPVs are generated automatically in the
project. This is shown in the screenshot below, where report-related parameters are
shown as variables. It also includes the normal DO/DA variables, which are part of
the report.
Figure 47
14.
In the dialogue box <server name> RCB Assignment, click OK to close. The
configuration can be downloaded to the RX3i Controller and the controller can be
put in RUN mode. Reports get enabled (see RptEna_RP = 1), if the configuration is
valid. The DO/DA data in the report gets updated based don the trigger options as
set in the client configuration.
Figure 48
Reports-related Parameters for URCB
The important report related parameters available as PPVs are defined below:
BufTm_RP
Buffer time parameter for the report.
