User Manual
Chapter 5
GFK-2849A
Oct 2019
Diagnostics
111
Group-
Error Code
Description
Cause
Recommended Action
5-5
CLI initialization
failure
The Command Line
Interface functionality on
the ECM850 failed to
initialize correctly.
Contact customer service.
6-1
Write to nonvolatile
memory failure
The ECM850 failed to
write data to nonvolatile
memory, which could
result from configuration
store/clear operations
from the programmer, or
Command Line Interface
commands.
Contact customer service.
13-5
Failure occurred
while processing
configuration.
The ECM850 ran in to a
failure while processing a
new configuration.
Contact customer service.
9-3
Rejected mail error.
Note: The RX3i controller
that delivered the
configuration to the
ECM850 should also log
its own different failure
fault in the Controller
fault table.
Contact customer service.
9-4
Mail processing error
on the ECM850.
The ECM850 received a
rejected mail message
from the CPU.
None.
5.5.2
Viewing and Clearing the Local Log Table
The only way to view and clear the data in the ECM850’s Local Log table is through the
Command Line Interface.
•
Log data can be viewed from the Command Line Interface using the log or show log
command.
•
The local log table can only be cleared from the Command Line Interface using the
clear log command, which requires Modify level access. Clearing the RX3i CPU fault
tables or restarting the ECM850 does NOT clear the local log table.
If the ECM850’s Local Log table overflows,
new entries overwrite the oldest entries, which
are lost. If that happens, the log or show log command indicates the number of entries that
have been lost. The count of lost entries is cleared when the local log table is cleared.
ECM850 Local Log Display
The first illustration below shows a typical display using the log command. The Loc column
number for ECM850 is always 000.
