Emerson Dixell iProChill IPC115D Application Manual Download Page 105

Page: 105 / 205

1592025050 iProChill v2.5 10D00 AG v1.3 GB 18.02.2016.docx

iProCHILL

105/205

6.8.18 Control panel

If user entered into SERVICE menu with 1

level or 2

level, he needs to input the 3

level password to

enter in the control panel screen. See graph below:

On the contrary, if user entered into SERVICE menu with 3

level, no password is needed for control paned

menu anymore.

The possible options in this menu are:



Parameters file management: Load last saved parameters or load default parameters.



Log file management:
Export log files to USB disk.



Language selection: Italian



English



Italian



Parameters file management:

Position the cursor on the element with UP and DOWN key, press ENTER, the parameters value will be

Summary of Contents for Dixell iProChill IPC115D














































































































































































































Search results

Summary of Contents for Dixell iProChill IPC115D

Reviews:

Emerson Dixell iProChill IPC115D, Application Manual, Page: 105 / 205

Search results

Summary of Contents for Dixell iProChill IPC115D

Reviews: