manualshive.com logo in svg

Emerson Digitax ST, User Manual

Share
Download
Emerson Digitax ST User Manual Download Page 43

Safety 

Information

Product 

information

Mechanical 

installation

Electrical 

installation

Getting 

started

Basic 

parameters

Running the 

motor

Optimization

EtherCAT 

interface

SMARTCARD 

Operation

Onboard 

PLC

Advanced 

parameters

Technical 

Data

Diagnostics

UL listing 

information

Digitax ST User Guide                                                                                                                                                                         

43

Issue: 5                                                                       

5      Getting started

5.1      User interfaces

There are six user interfaces available for the various drive variants.

•

CTSoft

•

SYPT  Pro

•

EZMotion PowerTools Pro

•

DST Keypad (LED)

•

SM-Keypad Plus (LCD)

Table 5-1 User interface compatibility

5.1.1     User software system requirements

System requirements are:
•

Windows 7, Windows Vista, Windows XP or Windows 2000 
(Including the latest Service Packs) only. 

•

Internet Explorer 5.0 or later.

•

Minimum of 800x600 screen resolution with 256 colors. 1024x768 is 
recommended.

•

512 MB RAM.

•

Microsoft.Net frameworks 2.0.

•

Pentium IV 1000 MHz or better recommended.

•

Adobe Acrobat Reader 5.05 or later for parameter help files access 

•

Windows

™

 Administrator rights to install.

5.2      CT Soft

CTSoft is a Windows based drive commissioning / start-up program that 
allows the complete control and display of all parameters within 
Emerson Industrial Automations’ ranges of drives.

CTSoft provides the user with a graphical interface that is logically split 
into a series of screens offering quick and easy viewing and, where 
appropriate, the ability to edit parameter values. Individual detailed 
parameter information can at any time be displayed showing the 
parameter function, type and range of permitted values. 
CTSoft can be used for set-up and monitoring, drive parameters can be 
uploaded, downloaded and compared, and simple or custom menu 
listings can be created. Drive menus can be displayed in standard list 
format or as live block diagrams. CTSoft is able to communicate with a 
single drive or network.
The drive's parameter set is split up into a series of related groups or 
menus. Many of these menus have an associated graphical block 
diagram which may be displayed and used interactively within CTSoft. 
For full details of the drive's parameters, the relevant pages from the 
drive and Solutions Module Advanced User Guides can also be 
displayed by simply clicking any parameter on any displayed list or block 
diagram view.
For the Digitax ST Indexer and Digitax ST Plus variants, CTSoft allows 
users to specify and execute motion sequences using sequential 
function chart style diagrams.
Refer to the on-line set-up wizard and help files in CTSoft for further 
information. 
CTSoft is available to download from: 
http://www.emersonindustrial.com/en-EN/controltechniques/downloads/
userguidesandsoftware/Pages/digitaxst.aspx

5.3      SYPTPro (Indexer & Plus only)

SYPTPro is a professional drive programming toolkit for OEM’s and End 
Users who wish to maximize performance of the Digitax ST Indexer or 
the Digitax ST Plus. SYPTPro allows the user to program in a choice of 
three languages, with a real-time multi-tasking environment
SYPTPro incorporates IEC61131-3 style ladder language editor. This 
form of programming will be familiar to all PLC programmers and is the 
ideal format for sequencing and I/O control.
For further information on programming with SYPTPro refer to the 

SM-

Applications Module And Motion Processors User Guide. 
SM-Applications Module And Motion Processors User Guide

 is available 

to download from: http://www.emersonindustrial.com/en-EN/
controltechniques/downloads/userguidesandsoftware/Pages/
digitaxst.aspx

5.4      EZMotion PowerTools Pro

Applications for the Digitax ST EZMotion are developed using 
PowerTools Pro software. PowerTools Pro is an easy to use, Windows

™

 

based set-up and diagnostics tool. It provides the user with the ability to 
create, edit and maintain the system set-up. 
PowerTools Pro is designed to be the easiest to use software available 
for the 1 ½ axis motion controllers.
Features of PowerTools Pro include:
•

Hierarchy Tree for quick navigation to any set-up view.

•

Simple I/O function assignments.

•

Powerful on-line diagnostic capability.

•

Fill in black motion profile parameters

For further information on programming with PowerTools Pro refer to the 

EZMotion User/Programming Guide

. 

Digitax 

ST 

Base

Digitax 

ST 

Indexer

Digitax 

ST 

Plus

Digitax 

ST 

EZMotion

Digitax 

ST 

EtherCAT

CTSoft

√

√

SYPT Pro

√

√

EZMotion 

PowerTools 

pro

√

DST Keypad

√

√

√

√

√

SM-Keypad 

Plus

√

√

√

√

√

Summary of Contents for Digitax ST



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands