User Instructions
MAN-02-04-60-0350-EN Rev. 3
February 2019
32
Section 6: Control Unit
Control Unit
Confirm the selector switch (with a slight flip towards
, (see Figure 24, to Figure 28, ) to
change the selected parameter. To confirm this input readiness, the display changes from
"EDIT" to "SAVE".
Figure 38
Configuration Display (2)
Use the control switch towards to the characters to change the parameter. or
(see Figure 33 to Figure 36). After reaching the desired parameter value, confirm the value
with the selector switch (again, flip it slightly towards
, (see Figure 24 to Figure 28,).
6.3.3 Configuration example
By way of example, we will change parameter P20.6 (wireless) from 0 (wireless off) to 2
(Bluetooth communication on). Thus, the Bluetooth connection is activated for a short
time and then deactivated again automatically:
Step 1 - The operating and control switch must be in the neutral position.
Figure 39
Selector Switch (1, Red); Control Switch (2, Black)
1
2
