EMC2 VNXe3150, Hardware Information Manual

Page: 46 / 56

44 EMC VNXe3150 Hardware Information Guide
Overview
6-Gb/s SAS port LEDs and port direction (input or output) — Figure 30 shows the LCC
6-Gb/s SAS port LED—a bi-color (blue/green) LED below the connector, either left or
right—that indicates the link of the SAS port.
Figure 30 also shows a double black circle
(or dot) symbol (for input) or a double black diamond symbol (for output).
Note: For information about the SAS cable, see the note under “6-Gb/s SAS x4 ports” on
page 42 and Figure 29 on page 43 .
Figure 30 DAE LCC 6-Gb/s SAS port LED
Table 22 describes the DAE LCC 6-Gb/s SAS port LED.
LCC enclosure ID (enclosure address) and bus ID
On the rear of the LCC (A and B), an LCC enclosure ID indicator is provided. This ID
indicator is a seven-segment LED for displaying decimal numbers. The LCC enclosure ID
appears on both LCCs (A and B) which is the same ID number.
Figure 31 on page 44 shows
the enclosure ID is set at installation.
Each LCC includes a bus (loop) identification indicator. This indicator is a seven-segment
LED for displaying decimal numbers.
Figure 31 shows the SP initializes the bus ID when
the operating system is loaded.
Figure 31 Example of LCC loop bus ID and enclosure ID
x4
6Gb SAS
x4
6Gb SAS
VNX-000087
Table 22 DAE LCC 6-Gb/s SAS port LED
LED Color State Description
Link Blue On All lanes are running at 6 GB/s
Green On One or more lanes running at 1.5 or 3 Gb/s
Alternating
Blue/Green
Blinking Port is being marked by the host
— Off Not connected
x4
6Gb SAS
#
x4
6Gb SAS
Enclosure ID Loop bus ID VNX-000081