EMC SVR-I2U-R2312, Installation And Maintenance Manual

Page: 23 / 34

When removing the server from the cabinet, do not hold the server up by its power/
control module, which is on the right side of the front of the server.
Procedure
1. Remove the stabilizing screw behind the latch bracket on each side ( Figure 21 on
page 23 ).
Figure 21 Removing the stabilizer screws
CL5008
2. Pull the server forward until it locks in place ( Figure 22 on page 23 ).
Figure 22 Sliding server out of the cabinet to the locked position
CL5011
3. Slide the blue disconnect tabs forward to release the inner rails from the slide rails
( Figure 23 on page 24 ).
Removing the server from the cabinet
23