Switching rail alignment posts
On each end of each rail assembly, switch the alignment post assembly using the
procedure that follows. Refer to
while performing the procedure.
Procedure
1. Remove the screw that secures the alignment post assembly.
2. Push the plastic tab on the alignment post assembly up or down, depending on the
rail end, and hold the tab in.
3. Rotate the alignment post assembly either clockwise to switch from round posts to
square posts or counter clockwise to switch from square posts to round posts until
the assembly clicks into place.
4. Secure the alignment post assembly in place with the screw that you removed.
The screw goes in the hole opposite the hole from which you removed it.
Figure 1 Switching from round rail alignment posts to square alignment posts
CL4951
1
3
2
4
1
3
2
4
6
EMC SVR-I2U-R2312 Server Installation and Maintenance Guide
0
