EMC-PARTNER IMU4000, User Manual

Page: 27 / 104

E-IMU4000-E-Manual 27/104
2 Safety
The IMU4000 belongs to Safety class 1
2.1 Safety standard
The IMU4000 fulfils the requirements of the safety standards IEC 61010 for laboratory measurements
equipment „Safety requirements for electrical measuring, control and laboratory equipment“. Based on EN
61010 the declaration of conformity to low voltage directive (LVD 73/23/EEC O.J.N° L77, 1973-03-26) is
given.
This manual is an integral part of the IMU4000 tester. The instructions contained in
the manual regarding operation and the test set up are to be strictly observed
2.2 Climatic Conditions
The IMU4000 contains high voltage circuits in integrated form. EMC PARTNER only guarantees a correct
functioning of the tester IMU4000 and the associated accessories, if the IMU4000 is operated in the climatic
conditions specified.
Temperature 15 °C to 35 °C
Relative humidity 45 % to 75 %
Atmospheric pressure 86 kPa to 106 kPa (860 to 1060 mbar)
Not influenced by: direct solar radiation, rain or condensation water, dust or larger
electro magnetic fields as specified in the EMC compatibility chapter.
The IMU4000 should be operated in a dry, clean room. If for any reason condensation water is present in
the IMU4000, then no IMU4000 operation should be started before the tester is thoroughly dry.
It is strictly forbidden to operate the IMU4000 in rooms with a gas explosion risk. The
high voltage of the IMU4000 can generate sparks, which could ignite gases
People with heart pacemakers should not be in the vicinity of the test set up during
operation