EMC-PARTNER IMU4000, User Manual

Page: 58 / 104

IMU4000
58/104
By touching or clicking twice on Vnom the following windows will be shown
Level Vnom
selected
Actual selected
submenu
Numerical input
terminal for
selecting the
voltage level.
The level can
also be selected
with the rotary
knob beside the
monitor.
with o.k. the selected value will be stored and the windows will be
closed
Additional help can be activated by holding the finger on one line for 2 to 5 seconds e.g. Vnom
Additional help will
be indicated when
available.
Actual selected
submenu
Using the same procedure Polarity, Polarity ramp and Level ramp can be selected.
Combination of ramps are possible except with V-ramps. When a V- ramps and apolarity ramp are selected
a red warning will occur. One of the parameters is highlighted in red and will be deactivated.
Conflict 2 ramps
selected.
Conflict shown at
submenu Level