EMC-PARTNER IMU4000, User Manual, Page: 57 / 104

E-IMU4000-E-Manual 57/104
6 Testing with the IMU4000
6.1 Operation of the tester via touch screen monitor
Only when Chapter 2 „Safety“ and Chapter 5 „Preparation for operation“ and all instructions have been
followed the IMU4000 can be operated.
To start the control, tester, the following steps must be carried out:

Turn the power switch on the rear side to position I

Operate the ON/STBY button on the front panel the display turns to:
6.1.1 General information about the touch screen monitor
Home = back to the first window
Selectable test
Actual selected
test general menus
Green Icon
indicates
that EXT is
installed
in the generator
Active Extension
Overview about the most important parameter of the EXT
6.1.2 Selecting the parameter – Example CWG
The test can be selected by scrolling with a finger on the touch panel or using the rotary knob. When the
green icon is in the centre of the windows click on it and the CWG windows will be shown
Home = back to the first window
Level parameter
Actual selected
submenu
Graphical
definition of the
parameter e.g.
voltage level.
Green arrow
indicate the
selectable
parameter
Overview about the selectable submenus