EMC-PARTNER CDN2000-06-25, User Manual

Page: 31 / 54

E-CDN2000-06-25-E-Manual 31/54
6 Testing with the CDN2000-06-25
6.1 Quickstart of TRA or MIG together with CDN2000-06-25
For MIG operation refer to the MIG manual and for TRA operation refer to TRA manual section "Quickstart".

All connection must made as described in chapter 5 at the rear and the front panel of the CDN.
6.1.1 MIG0603Inx Operation with CDN2000-06-25

Before starting a test, the generator must be configured as follows:
Select test voltage
Select number of pulses = total number of pulses
for ALL coupling paths.
Select CDN-3phase from the menu.
The coupling path is not relevant, as switching
must be undertaken manually by the operator on the
CDN2000-06-25 front panel
Ensure the PWR button is NOT enabled (light extinguished).