EMBRON Hatteland HD 12T21 MMC Series, User Manual

Page: 54 / 124

54
IND100129-155
All specifications are subject to change without prior notice!
Specifications - HD 26T21 MxC-xxx-xxxx
SPECIFICATIONS
Note: All specifi cations are subject to change without prior notice!
Please visit www.hattelandtechnology.com for the latest electronic version.
2/2
• W:621.00 [24.45''] x H:435.00 [17.13''] x D:97.70 [3.85''] mm [inch]
• 4 x M6 VESA mounting 280x150mm, Max 12mm deep
• Weight: 16.2kg / 35.6lbs
• LED Backlight Technology, TFT Active-matrix
• 25.54 inch viewable image size, Widescreen, Aspect Ratio 16:10
• S-MVA (Multi-domain Vertical Alignment) Technoogy, RGB Vertical Stripe
• Native Resolution : 1920 x 1200
• Pixel Pitch (RGB) : 0.2865 (H) x 0.2865 (V) mm
• Response Time : 20ms (Tr+Tf)
• Contrast Ratio : 1500:1 (typical)
• Light Intensity : 350 cd/m
2
(typical)
• Viewable Angle : +/- 88 deg. (typical) (Up/Down/Left/Right)
• Active Display Area : 550.08 (H) x 343.8 (V) mm
• Max Colors : 16.7 million
• Operating : Temperature -15 deg. C to +55 deg. C
Humidity up to 95%
• Storage : Temperature -20 deg. C to +60 deg. C
Humidity up to 95%
• IP-Rating : Protection: IP66 front - IP22 rear (EN60529)
• Compass Safe Distance : Standard: 125cm - Steering: 80cm
Lifetime Considerations:
Even though the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
Behind front bezel - Glass Display Control™ (GDC) IP66:
• Power On/Off, Brightness Control (-/+)
• Power LED, HDD/SSD LED, Mode Status Indicator (ECDIS, Service)
• Buzzer (through glass), Light Sensor (behind glass)
Connector Rear
• Ethernet GBLan 2 x RJ-45
• Keyboard 1 x PS/2 (purple)
• Mouse 1 x PS/2 (green)
• COM RS-232 1 x DB9M non-isolated
• COM RS-422/485 1 x DB9M non-isolated
• VCOM RS-232 1 x Internal Virtual COM (Software controlled)
• USB1.1 (<10m) 1 x USB Type A
• USB2.0 (<5m) 3 x USB Type A
• DVI or RGB OUT 1 x 29P DVI-I or as RGB with adapter
• RGB OUT 1 x 15p HD D-SUB
• AC Power IN 1 x Std IEC inlet
• DC Power IN 1 x 2-pin Terminal Block 5.08
• Line OUT 1 x 3.5mm mini jack (Lime)
• Mic IN 1 x 3.5mm mini jack (Pink)
• HDD/SSD Tray 2 x 2.5" Sized Tray/Bay (1 x factory default occupied)
• Projected Capacitive Touch Screen (Multitouch, USB interface)
• Capacitive Touch Screen w/Cosmetic alu front frame (USB, -FxxC model)
• Optical Bonding Technology
• Color Calibrated models (ECDIS)
• Variations of SSD/HDD Storage, RAM Memory, Operating System
• 1 x PCA200828-1 (4xCOM RS-422/485 isolated NMEA 2 channel)*
• 1 x PCA100294-1 (4xCOM RS-232 unisolated DB9M)*
• 1 x ZIA0001310-B (1 x CAN isolated, 2 channel)*
• 1 x ZIA0001310-SLCAN (1 x CAN isolated, 2 channel, socketCAN)*
• 1 x HT 00235 OPT-A1 (2W Amplified Audio out via DB9F)
• 1 x PCA100297-1 (Isolated Digital IO module,4 x Output/4 x Input)*
• 1 x PCA100298-1 (LAN 10/100Mbps, 2 ports RJ45)*
• 1 x VSD100832-1 (LPT1 Parallel (Bi-Directional/EPP/ECP). DB25F
*Only 1 module can be installed
Multi-power Supply:
• 115&230VAC - 50/60Hz + 24 VDC
Note: You may connect either AC power or DC power or both. In case both sources
are connected, power will be sourced from the AC input. If AC input is lost, there will
be a uninterrupted switch-over to DC input.
Power Consumption:
• Operating AC/DC: 79W (typ) - 94W (max)
A P P R O V A L S & C E R T I F I C A T E S
Physical Considerations: TFT Technology:
TFT Characteristics:
Input/Output Connectors:
Environmental Considerations:
Power Specifications:
This product have been tested / type approved by the following classification societies:
IEC 60945 4th (EN 60945:2002) IACS E10 IP66 ClassNK - Nippon Kaiji Kyokai GL - Germanischer Lloyd
DNV - Det Norske Veritas ABS - American Bureau of Shipping CCS - China Classification Society BV - Bureau Veritas
LRS - Lloyd’s Register of Shipping EU RO MR - Mutual Recognition
Computer Specifications:
Factory Options:
User Controls:
• OS Options : None or see table below
• Storage Options : None or see table below
• CPU/ Processor : See table below
• Memory Options : None or see table below
• System Chipset : Intel® BD82QM57
• Graphics Chipset : Intel® Arrandale IGD supports DVMT 5.0
Supports Direct3D 10.1,
OpenGL 2.1, OpenGL ES2.0 (Linux)
• Ethernet LAN #1 : Intel® 82577LM Gigabit LAN 10/100/1000Mbps
• Ethernet LAN #2 : Realtek RTL8111C Gigabit LAN 10/100/1000Mbps
• Audio Chipset : Realtek ALC892
• BIOS : UEFI AMIBIOS
• Speaker / Buzzer : No Speaker / 3500Hz Buzzer
• Watchdog Timer : 256 Segments, 0, 1, 2...255 sec/min
• Power Manager : ACPI S3/S4
• Monitoring : Temperature and voltages status
• Other Features : GPIO, LAN Wakeup, USB Boot and Wakeup
• DVI-I OUT Resolution : From 640 x 480 to 1920 x 1200 @ 60 Hz
• RGB OUT Resolution : From 640 x 480 to 2048 x 1536 @ 75 Hz
• HD CMB SX1-C1 : 1 x Console Mount Kit. EN60945 Tested
• HD TMB SX1-C1 : 1 x Table Mount Bracket. EN60945 Tested
Note: Can not be combined with HDD, use SSD only.
• HD VED SX1-A1 : 1 x VESA Bracket, not EN60945 Tested
• HD 26TAP SX 1-A1 : 1 x Frame Adapter for JH 27T11 MMD Cutout(Retrofit)
• JH C01MF A-A : 1 x USB Cable 1m, TypeA-Chassis mount receptacle
• HT 00262 OPT-A1 : 4 x RS-422/RS-485 isolated, USB ext. module
• HT 00263 OPT-A1 : 4 x RS-232 COM non-isolated, USB ext. module
• HT 00264 OPT-A1 : 1 x CAN isolated, 2 channel, USB ext. module
• HT 00273 OPT-A1 : 4 x Digital IN/OUT isolated, USB ext. module
• HT 00274 OPT-A1 : 2 x LAN 10/100Mbps, RJ45, USB ext. module
• JH 26TAP STD-A1 : 1 x Frame Adapter for Series 1 Cutout (retrofit)
• HT 00300 MSOS : OS options: https://www.hattelandtechnology.com/os
• HD 000TR SX1-A1 : 1 x Removable Front Tray 2.5" Empty
• HD xxxyy SX1-z1 : 1 x Removable Front Tray 2.5" w/Storage Device*
*Where xxx=080,120,300,320,001. yy=GB,TB. z=S (SSD), z=H (HDD).
Example: HD 120GB SX1-S1 (120GB SSD SATA 2,5"). Choose Device from table.
Available Accessories:
Type Description Size/Specification
CPU 1 x Intel® Celeron® P4505, 1.86GHz, 2MB Cache, FSB 800MHz
or 1 x Intel® Core™ i7-620LE, 2.0GHz, 4MB Cache, FSB 1066MHz
or 1 x Intel® Core™ i5-520E, 2.40GHz, FSB 800/1066MHz, 3MB Cache
Memory 1 x Single Channel, 204-pin
DDR3 1066/800Mhz
- 2GB, 4GB (Max)
Storage 2 x 2.5” SSD SATA - 240GB (599TBW), 480GB (945TBW)
- 960GB (1750TBW)
Storage 2 x 2.5" HDD* SATA
*Combination buzzer and
spinning hard disk (HDD)
is not possible.
- 1TB
OS
Option
Embedded Enterprise (WEE):
- Microsoft® Windows® Server 2003/2008/2008R2 (Eng)
- Microsoft® Windows® 7 Professional/Ultimate (Eng, SP1)
- Windows® 10 IoT Enterprise 2016 LTSB (64bit)
openSUSE® 11.4 (Linux)
Fedora™ 15 (Linux)
Ubuntu® 10.04 LTS
Ubuntu® 12.04 LTS
See also Accessories (HT 00300 MSOS) options.
Notes - For Win7 OS, >1GB RAM + Review "SSD Selection Guide" in manual.
- 32bit or 64bit versions available where applicable.
Available Computer Configurations: