EMBRON Hatteland HD 12T21 MMC Series, User Manual

Page: 42 / 124

42
IND100064-35
Operation
User Controls
USER CONTROLS OVERVIEW
The units are designed using Glass Display Control ™ (GDC) touch technology to allow interactivity adjusting brilliance
(brightness) and control power on / off with the use of illuminated symbols. Note that these symbols are only visible
(backlight illuminated) when suitable power is connected. There are no physical moving knobs, potmeters, wheels
or push buttons available as everything is touch surface controlled by Projected Capacitive technology, that allows a
human finger (including several types of gloves) to control the unit.
Power ON/OFF:
This symbol and all text will illuminate in red when suitable power is connected and the unit is turned off. When the
unit is on and operating, this symbol will change to green color and illuminate constantly.
Power ON:
To turn the unit on, verify that the symbol is illuminated in red (indicates suitable power is connected) and touch the
power symbol and hold until the the symbol changes to green light or a image appears on the screen.
Power OFF:
To turn the unit off, touch the power symbol and hold until it either illuminates/changes from green to red or the image
on screen disappears.
Brightness Adjust:
Brilliance / Brightness adjustment of the displayed image is adjusted by touching the (-) or (+) illuminated symbols.
The entire area of text and symbols are visible as long as the unit is powered. Note that only the (-) and (+) are touch
sensitive while the and
BRILLIANCE
symbols are not.
Brightness &
Decrease/Increase
ECDIS Status / Indicator
Power On/Off + Status
Action Indicators
Light Sensor (not in use)
Buzzer 3500Hz