EMBRON Hatteland HD 12T21 MMC Series User Manual Download Page 15

Page: 15 / 124

Product Labeling

IND100077-110

Label Locations

Number ID and coloring based on “Label Size and Types“ table from previous page. All illustrations below are seen

from rear (and side where needed) with connectors facing down. Actual labels regarding its size and text orientation

vs product size is drawn in. Due to space restrictions on selected units, some labels will be rotated 90 degrees to fit

properly. The arrangement of labels may be shifted/stacked differently as it is based on factory options, such as; Touch

Screen and Operating System (OS), but they will be grouped together where possible.

Label Positions

Notes

Applies for Product Range

Warranty label covers screw.

Labels placed on rear.

HD 12T21 MMC-xxx-xxxx

Warranty label covers screw.

Labels placed on rear.

HD 15T21 MMC-xxx-xxxx

Warranty label covers screw.

Labels placed on rear.

HD 17T21 MxC-xxx-xxxx

Summary of Contents for Hatteland HD 12T21 MMC Series





























































































































Search results

Summary of Contents for Hatteland HD 12T21 MMC Series

Reviews:

Related manuals for Hatteland HD 12T21 MMC Series

Brands by name

Popular brands

EMBRON Hatteland HD 12T21 MMC Series, User Manual

Search results

Summary of Contents for Hatteland HD 12T21 MMC Series

Reviews:

Related manuals for Hatteland HD 12T21 MMC Series

Brands by name

Popular brands