2
1.
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT: The instruction manual you are holding includes essential information on
the safety measures to be implemented for installation and start-up. Therefore, the
installer as well as the user must read the instructions before beginning installation and
start-up.
Keep this manual for future reference
.
When using this electrical equipment, basic safety measures listed below should be followed:
Disconnect all AC power during installation.
Warning - To reduce the risk of injury, do not permit children to use this product unless they are
closely supervised at all times.
A green colored terminal marked "Earth Ground" is located inside the wiring compartment. To
reduce the risk of electric shock, this terminal must be connected to the grounding means
provided in the electric supply service panel with a continuous copper wire equivalent in size to
the circuit conductors supplying the equipment.
To reduce the risk of electric shock, connect the local common bonding grid in the area of the
swimming pool or spa to these terminals with an insulated or bare copper conductor.
All field installed metal components such as rails, ladders, drains, or other similar hardware
within 3 meters of the pool or spa shall be bonded to the equipment grounding bus with copper
conductors.
2.
CONTENTS OF THE PACKAGING
The following component should be found inside the box:
SSC
one
®
Control unit
Buffer solution pH 7.0
Electrolytic cell
Buffer solution pH 4.0
1.5 - 2” universal union
2 x saddles 50 mm – ½”
Cell cable
Dosing fitting kit
pH probe
Dosing pump rotator tube
3.
TECHNICAL FEATURES
Standard working voltage
120-230 V AC – 50/60 Hz
Maximum chlorine production
15 g/h
•
25 g/h
•
45 g/h
Volume of the pool up to
150 m
3
Water salinity required
4 – 6 g/l
Water temperature
15°C - 40°C (50°F – 104°F)
Electrodes
Self-Cleaning coated titanium plates
Range of pH measurements
6 – 9 pH
pH precision
± 0.2 pH
Dosing pump flow rate
1.8 l/h
Dosing pump working pressure
1.5 bar
