Charging will begin automatically.
2.0 Connecting and Charging the Player
2.1 Connecting and Disconnecting the Player from Your Computer
Turn on the player and use the included USB cable to
connect
it to your
computer. Plug the small end of the USB cable into the player, and the
large end of the cable into the computer.
The
first time
you connect the player to your computer, your computer will
detect it and automatically install any necessary drivers. When it has
finished, the player will appear in
My Computer
as
Removable Disk
or
USB Disk Device.
To safely
disconnect
the player from your
computer, click the green arrow in the
system tray (the area by the clock on your
task bar), which will display a list of attached
USB devices. Click the player in the list.
Windows will display a message when it is
safe to remove the player.
2.2 Charging the Battery
The player has a built-in battery that must be charged before the player
can be used.
1. Turn on the player.
2. Connect your player to a turned-on computer via the USB cable.
3. Let the player charge for
4 hours
.
4. Disconnect the player from the computer using the safe removal
method on pg. 4.
E5 Series User Manual
Page 4 of
Any
USB device
that stores data
(e.g. flash drives,
cameras, and
media players) should always
be disconnected from your
computer using this method!
30
