51
5.3.4 Stamp
This provides an option to enable or disable the Camera Name and the Time stamp on the video. The user can also choose a position for the stamp on the
screen.
To set up stamp as follows:
1 - Go to Main Menu Setup Record Stamp interface. Refer to Fig 5-13.
2 - Checkmark camera name and time stamp. Click “Setting” button to set up the position of the stamp. You can drag the camera name and time stamp at
random positions as shown below.
3 - Select “All” to set up all channels with the same parameters.
Fig 5-14 Schedule Configuration-Schedule
Fig 5-13 Record Configuration-Stamp
Before drag
After drag
5.3.5 Recycle Record
This option is used to recycle the HDD space once it is full. If enabled, the system will automatically delete the old records and recycle the space if it is com-
pletely utilized. The setting steps are as follows:
1 - Go to Main Menu Setup Record Recycle Record interface.
2 - Checkmark recycle record to activate auto recycling. If the option is disabled or not selected, the NVR would stop recording once HDD is full.
3 - Click “Apply” button to save the setting.
5.3.6 Snap
In this interface, user can set up resolution, quality, snap interval, snap number.
5.4 Schedule Configuration
Schedule configuration includes three sub menus: schedule, motion and sensor.
5.4.1 Schedule
This tab allows defining schedule for normal recording for seven days of a week, 24 hours of a day. Every row denotes an hourly timeline for a day. Click the
grid to do relevant setup. A highlighted area denotes selected timeline. Operate the following steps to set schedule:
1 - Go to Main Menu Setup Schedule interface. Refer to Fig 5-14.
EN