42
Button
Function
REC
Record manually
Search
To enter search mode.
MENU
To enter menu.
Exit
To exit the current interface.
ENTER
To confirm the choice or setup.
Direction button
To move cursor in setup
ZOOM
To zoom in
PIP
To set picture in picture
To control playback. Play/Pause/Stop/Previous
Section/Next Section/Rewind/Fast Forward
Multi
To choose multi screen display mode.
Next
To switch between single picture and picture group
SEQ
To enter into auto dwell mode
INFO
Get information about DVR like firmware version, HDD information
2.5 Control with Mouse
2.5.1 Connect Mouse
It supports USB mouse through the ports on the rear panel. If mouse is not detected or doesn’t work, check below steps:
1. Make sure the mouse is plugged in the USB mouse port.
2. Try with a good know mouse.
2.5.2 Use Mouse
During live:
Double-click on any camera window to see the full screen. Double-click again to return to the previous screen.
Right click to reveal the control menu on the screen. Right click again to hide the menu.
In Configuration:
Click to enter a particular option. Right click to cancel the option or to return to the previous menu.
In order to input a value in a particular screen, move cursor to the input box and click. An input window will appear as shown below. It supports digits, alphabets
and symbols input. Click Shift button to input Capital letters and symbols; click Shift button again to return.
It supports mouse drag. Take setting up motion detection area for example: Click customized, hold down the left button and drag to set motion detection area.
Key points to check in case the remote doesn’t work.
1. Check batteries polarity.
2. Check the remaining charge in the batteries.
3. Check IR controller sensor for any masking.
4. Check the ID of the remote with respect to the NVR.
If it still doesn’t work, please change a new remote controller to try, or contact your dealers.
2.4 Remote Controller
It uses two AAA size batteries.
- Open the battery cover of the remote controller.
- Place batteries. Please take care the polarity (+ and -).
- Replace the battery cover.
The interface of remote controller is shown in Remote Controller.
Digital Numbers and Letters Input Window
In Playback:
Click to choose the options. Right click to return to live mode.
In Backup:
Click to choose the options. Right click to return to previous picture.
In PTZ Control:
Click left button to choose the buttons to control the PTZ. Click right button to return to live.
Note: Mouse is the default tool for all operations unless an exception, as indicated.
EN
