
218
MES3000 Ethernet switch series
Table 5.265– Commands of global configuration mode
Command
Value
Action
ip route
prefix
{
mask
|
prefix_length
}
gateway
[metric
distance
]
[reject]
distance: (1..255)/1
Creates static rule of routing.
- prefix – target network (e.g. 172.7.0.0);
-
mask
– network mask (in decimal system format);
-
prefix_length
– prefix of network mask (number of
units in mask is 0..32);
-
gateway –
gateway for access to target network;
-
distance
– weight of route (1..255) (if not specified,
then default value is 1);
-
reject –
forbids routing to target network via all
gateways.
no ip route
prefix
{
mask
|
prefix_length
}
[
gateway
]
Deletes rule from static routing table.
ipv6 route
ipv6_prefix/len
gateway
[metric
distance
]
distance: (1..65535)/1
Create static IPv6 route
- ipv6_prefix/len
– destination network prefix
-
gateway
– gateway for destination network access
-
distance
–
route weight
.
Only switch formed (CPU traffic) packet
routing is supported.
no ipv6 route
ipv6_prefix/len
[
gateway
]
Remove static IPv6 route
ip proxy-arp
-/disabled
Enables APR requests proxy mode.
no ip proxy-arp
Disables APR requests proxy mode.
Commands of EXEC mode
Type of request of command line of EXEC mode:
console#
Table 5.266 – Commands of EXEC mode
Command
Action
show ip route
[connected | static |
{address
ip_address
[
mask
|
prefix_length
]
[longer-prefixes]}]
Displays routing table which satisfies set criteria.
–
connected
– connected route, i.e. route taken from directly connected and acting interface;
–
static
– static rout prescribed in routing table.
sh ipv6 route
Show IPv6 route table
Sample of command execution
Display routing table:
console#
show ip route
Maximum Parallel Paths: 2 (4 after reset)
Codes: C - connected, S - static
C 10.0.1.0/24 is directly connected, Vlan 1
S 10.9.1.0/24 [5/2] via 10.0.1.2, 17:19:18, Vlan 12
S 10.9.1.0/24 [5/3] via 10.0.2.2, Backup Not Active
S 172.1.1.1/32 [5/3] via 10.0.3.1, 19:51:18, Vlan 12
Table 5.267 – Description of command execution result
Field
Description
С
Displays route origin: