Elspec G3500 BlackBox, User And Installation Manual

Page: 64 / 358

64
Leakage Current
A designated channel is used for leakage current in one of the following manners
i.
Calculated channel
ii.
Physical channel measured via IDC channel of a portable unit
Note : I
5
nominal value should be configured to suit the expected leakage current value
which is usually a fraction of the nominal phase current.
I
5
should be configured according to the mode of work i.e., physical leakage measurement or
calculated leakage as illustrated below.

To apply your changes select to review your changes;
N
OTE
N
OTE
N
OTE
If you are not logged on as the Administrator, you will not be able to change any of these settings
& you will receive the following error message in your attempt to do so:
Once you have signed on at the Administrator ensure that you select to actually
affect your changes.
see also:

About Quick Configuration

Unit Configuration

Voltage & Frequency