Elspec G3500 BlackBox, User And Installation Manual

Page: 45 / 358

45

Plug in the
Current Probes
into the applicable sockets located on the
Rear Panel
(Pay
attention to the phase connections, as the channels are calibrated according to the clamps -
I1 for I1; I2 for I2; I3 for I3; I4 for I4 & IDC for the DC Clamp):

Connect the measurement end to the measured power source:

The LED light will illuminate confirming a solid connection:
S
PECIFICATION
G4500 G3500
Number of Inputs 4 (3 Phases & Neutral) +
DC/Ground 4 (3 Phases & Neutral)
Maximum Peak
Measurement I1 to I4: 10 V
Pk
I5: 3 V
Pk
From Clamp
I1 to I4: 10 V
Pk
From Clamp
Type Clamp On Current Transformer
With mV Output Clamp On Current Transformer
With mV Output
Range I1 to I4: 0 to 10 V
Pk
I5: 0 to 3 V
Pk
From Clamp
I1 to I4: 0 to 10 V
Pk
From Clamp
Burden 0.05VA (Typical) @ 5 IRMS 0.05VA (Typical) @ 5 IRMS
Bandwidth 25kHz (Typical) @ 5 IRMS 12.5kHz