Elspec G3500 BlackBox, User And Installation Manual

Page: 263 / 358

263

Select Enable to enable the GPS’s use. The GPS Configuration section will confirm:

The Time Stamp: Date & UTC Time

Latitude: Geographic coordinate that specifies the north-south position of a point on the
Earth's surface.

Longitude: Geographic coordinate that specifies the east-west position of the GPS on the
Earth's surface.

Altitude: Geographic coordinate that specifies the vertical or "up" direction point of the GPS.

Signal Quality: Displays the manner in which the GPS is synchronized to the signal. In this
case SPS – Standard Positioning Service.

Status: Fixed means GPS is directed to the satellite. Not fixed – means that the GPS is not
directed to the satellite. Recheck your GPS connections again, including the Power Source (if
in use).

Tracked Satellites: Number of satellites tracked by the GPS.

Delay: If you are using a GPS other than the GPS supplied by Elspec you will need to toggle
the phase calculations of the GPS according to the product specifications.

Satellite Details

To apply your changes select to review your changes
SEE ALSO:

Connect Serial Ports

About Advanced Settings

System Log

Create Custom Events

Events List

E-Mail Alerts

About Reports

Energy Meter

Display Setup

Portable BLACKBOX Software (Firmware) Upgrade