Elspec G3500 BlackBox, User And Installation Manual

Page: 34 / 358

34
WARNING
Before you start ensure that the panel is de-energized & that you take the necessary
Safety Precautions
!
Unit Powering
You may either power up either G4500 / G3500 Portable BLACKBOX by using the main AC Power
Supply / the Auxiliary Power Supply / Battery Power Supply:
connect by using the AC POWER SUPPLY:
WARNING
85-260V AC ± 10%, 50/60Hz
OR
120-370V DC

2A/250V Fuse Holder

Use only suitable fuse replacement!

Make sure the Instrument is properly
grounded through the power cord to
protective earth ground

35-55V DC Watt Maximum

On the Rear Panel connect the female end of
the
Power Cable
to the
Main Power Supply
inlet socket of the unit:

Connect the male plug end of the Power
Cable to the electrical supply outlet

On the Front Panel turn on the Main
Power Supply
Switch to the ON position:

On the Rear Panel turn on the Main
Power Switch
to the ON position:

Verify that the unit is running on AC Power
by using the status indicator lights:
Flashing Blue Main Power Applied, Battery
Charging
Solid Blue
Main Power Applied, Battery
Fully Charged