57
Parameter setting
Sensors Mini-Sewi KNX TH-L-Pr and Mini-Sewi KNX L-Pr
• Version: 30.08.2018 • Technical changes and errors excepted.
6.14. Absolute humidity
The chapter "Absolute humidity" only applies to the TH-L-Pr model.
The absolute air humidity value is detected by the sensor and can be output to the bus.
6.15. Comfort field
The chapter "Comfort field" only applies to the TH-L-Pr model.
The sensor can send a message to the bus if the limits of the comfort field are excee-
ded. In this way, it is for example possible to monitor compliance with DIN 1946 (stan-
dard values) or even to define your own comfort field.
Switching output sends on change to 0
• Do not send message
• if switching output = 0
send 0
Switching output sends on change and
periodically
Send switching output status
Switching output sends on change to 1
and periodically
if switching output = 1
send 1
Switching output sends on change to 0
and periodically
if switching output = 0
send 0
Use measured values
No • Yes
Sending pattern
• never
• periodically
• on change
• on change and periodically
At and above change of
(if sent on change)
0.1 g • 0.2 g • 0.5 g • 1.0 g • 2.0 g • 5.0 g
Send cycle
(if sent periodically)
5 s • 10 s • 30 s… • 2 h
Use comfort field
No • Yes
