- 17 -
The general operations are as
follows:
▲▼
◄►
Press these buttons to select the items. The display will scroll left/right if the selected item is not shown on the screen.
Numeric
Press these buttons to select the camera.
COPY
(
)
Press this button to copy all the settings - excluding detailed Motion settings, Video Loss settings, Title/Audio - of the focus
camera to all the following cameras. (eg. focus camera is 1, its settings will be copied to those of cameras 2-4.)
ESC
Press this button to escape from this screen, and return to Setup Menu display. If the Save dialog is shown, press
ENTER
to
exit and save,
ESC
to exit without saving.
The following
is a brief description for each item and its specific operations:
Title – The title (Max. 8 characters) of this camera. Please follow the Text Input method described in
Section 4.1
to modify
this item.
Video Loss Settings.. – used to setup the action settings when video loss is detected for this camera. Press
ENTER
in
Settings.. to call up Video Loss Setup display for the camera. Please refer to
Section 6.2.1
for the details.
Motion Detection – whether the motion detection of this camera is enabled or not. Press
ENTER
or
+/-
to check/uncheck this
item. The default setting is “
ˇˇˇˇ
” - checked.
Motion Settings.. – used to setup the motion settings for this camera. Press
ENTER
in Settings.. to call up Motion Setup
display for the camera. Please refer to
Section 6.2.2
for the details.
Covert – covert or not. If the camera is covert, the video of this camera can only be seen if the user has logged in as
Administrator. Press
ENTER
or
+/-
to check/uncheck this item. The default setting is “
––––
” - unchecked.
Call By Event – whether to switch the call monitor to the video of this camera if certain event occurs for this camera. There
are 4 options, including Off, Motion, Alarm, Both (Motion & Alarm). Press
+/-
buttons to select one.
Dwell Time – the dwell time if Call By Event is set to Motion, Alarm, or Both. Press
+/-
buttons to adjust the value (3-60
seconds, discrete).
Audio – the AUDIO IN corresponding to this camera. If selected, the audio data for the selected AUDIO IN will be
recorded with the video data for this camera. Press
+/-
buttons to select none (N/A) or the AUDIO Inputs (1/2). The default
setting is “N/A”.
Record Quality – the record quality for this camera. Press
+/-
buttons to select the value (1-9, with 1 the lowest (rough)
quality, 9 the highest (fine) quality).
Event Record IPS – the IPS (Images Per Second) for this camera if certain event (Motion, Alarm) occurs for this camera.
This camera will be recorded at this rate for Post-record time since the event occurs. (Please refer to the following sections for
Post-record time.) Press
+/-
buttons to select the value (0 – 25 (PAL) / 30 (NTSC), discrete).
Pre-record IPS – the pre-record IPS for this camera if certain event (Video Loss, Motion, Alarm) occurs for this camera. This
camera is recorded at this rate for Pre-record time before the event occurs. (Please refer to the following sections for
Pre-record time.) Press
+/-
buttons to select the value (0 – Event Record IPS for this camera, discrete). Please note that the
total Event Record IPS / Pre-record IPS should not exceed the system recording capacity (NTSC: 120/CIF, 60/Half-D1,
30/Full-D1; PAL: 100/CIF, 50/Half-D1, 25/Full-D1), or the system will lower the actual rate automatically at recording.
Normal Record IPS – the normal record IPS for this camera. This camera will be recorded at this rate if no event occurs.
Press
+/-
buttons to select the value (0 – Pre-record IPS for this camera, discrete).
6.2.1 Video Loss Setup
In Camera Setup, press
ENTER
to call up Video Loss Setup of the selected camera as shown when the highlighted option is Video
Loss Settings of the camera to setup. The Video Loss Setup allows the administrator to define how the system responds to the
detected video loss for the camera.
The general operations are as
follows:
▲▼
Press these buttons to select the items.
Numeric
Press these buttons to select the camera.
- 18 -
COPY
(
)
Press this button to copy the Video Loss settings of the focus camera to all the following cameras. (eg. focus camera is 1, its
Video Loss settings will be copied to those of cameras 2-4.)
ESC
Press this button to escape from this screen, and return to Camera Setup display. If the Save dialog is shown, press
ENTER
to exit and save,
ESC
to exit without saving.
The following
is a brief description for each item and its specific operations:
Duration – response duration to define at most how long (in seconds) the Alarm Out relay and the Buzzer will keep being
triggered after video loss is detected for this camera. However, the Alarm Out relay and the Buzzer will be reset immediately
once the camera returns to normal. Press
+/-
buttons to adjust the value (3-60 seconds, discrete).
Pre-record – to define how long before video loss is detected this camera shall be intensively recorded at Pre-record IPS.
Press
+/-
buttons to adjust the value (0-10 seconds, discrete). Please note that the actual pre-record time may be shorter than
the value set if the total size of the pre-record pictures exceeds the pre-record buffer size of the system.
Alarm Out – to define which Alarm Output will be triggered when video loss of this camera is detected. Press
+/-
buttons to
select none (N/A) or one of the Alarm Outputs (1-2).
Buzzer – to activate the internal Buzzer or not when video loss of this camera is detected. Press
ENTER
or
+/-
to
check/uncheck this item. The default setting is “
ˇˇˇˇ
” - checked.
Log – to log to event logs or not. Press
ENTER
or
+/-
to check/uncheck this item. The default setting is “
ˇˇˇˇ
” - checked.
Screen Message – to display the event message on the screen or not. Press
ENTER
or
+/-
to check/uncheck this item. The
default setting is “
ˇˇˇˇ
” - checked.
E-mail – to send the event e-mail to remote station or not. The e-mail will be sent to the predefined receivers at the moment
when the event is triggered. Press
ENTER
or
+/-
to check/uncheck this item. The default setting is “
––––
” - unchecked.
6.2.2 Motion Setup
In Camera Setup, press
ENTER
to call up Motion Setup as shown when the highlighted option is Motion Settings.. of the camera
to setup. The Motion setup allows the administrator to define how the system responds to the detected motion for the camera.
The general operations are as
follows:
▲▼
Press these buttons to select the items.
Numeric
Press these buttons to select the camera.
COPY
(
)
Press this button to copy the Motion settings, including Detection settings, of the focus camera to all the following cameras.
(eg. focus camera is 1, its Motion settings will be copied to those of cameras 2-4.)
ESC
