9
4.
Closing the lid:
a)
Make sure the Rubber Seal Ring (18) is
fitted properly onto the inner part of the
lid (2).
b)
Observe the Rubber Seal Ring (18) inside
the Lid (2) and ensure that it is evenly
fitted into the track (Figure 10). (Caution:
If the rubber seal ring is damaged, do not
use the pressure cooker. Contact
Customer Service to repair or replace.)
c)
Close the lid (2).
d)
Hold the Handle (1) and turn it to the
“
Closed
”
position or
Counter -clockwise. (A clamping sound can be heard) (Figures 11
& 12).
Note: To ensure you are properly closing the lid, please make sure the
pressure limiting valve is on your left side when you are facing the front of
the pressure cooker (when facing the control panel).
5.
Adjust the Pressure Limiting Valve (3) to the
“
Air Tight
”
position , and
ensure that the Float Valve (5) sinks.
6.
When adjusting the Pressure Limiting Valve (3) to either the
"
Airtight
"
or
the
"
Exhaust
"
positions, line up the marking on the Pressure Limiting
Valve (3) with the arrow on the Handle (2) as shown in Figures 13 and 14.
10
11
12
13
14
