PRESSURE COOKER LID MARKINGS
Please note the "OPEN" and
"CLOSE" markings on the Upper
Ring (9) of the pressure cooker
body (13) and the“
”on the rim
of the Lid (2). To properly close
and secure the pressure cooker
Lid (2), always line up the "CLOSE"
marking on the Upper Ring (9)
and the “
”on the rim of the Lid
(2). (Figure 1)
RUBBER SEAL RING ASSEMBLY
Always ensure the Rubber Seal Ring
(18) is securely fitted onto the metal
ring in the interior of the Lid (2). The
Rubber Seal Ring (18) should fit
around the outside of the entire
metal ring. Make sure the crease in
the Rubber Seal Ring (18) meets
with the metal ring all the way
around. Then place the metal ring
and Rubber Seal Ring (18) back into
the Lid (2) making sure the hole in
the center of the metal ring's cross-
section is lined up with the metal pin
in the center of the Lid (2). Press
down firmly until the metal ring is
secured onto the Lid (2) (Figures 2A
– 2B).
1
2
1
2A
2B
www.maxi-matic.com
8
