JA09252018
8
www.elitescreens.com
5. RS485 Diagram
How to tension your screen
The tension has been properly preset for optimal performance. However, If the screen requires the tension to be
adjusted follow the steps below.
1. Fully deploy the screen.
2. Locate the adjustment knobs on each end of the weight bar
3. Push the tab in on the knob as you turn it clockwise to tighten and counterclockwise to loosen the
strings.
DO NOT
overtighten the strings as this will cause them to snap and void your warranty.
For Additional Service, Please Contact Elite Screens Technical Support,
Email:
A. RS485 Part Setting
1. Baud rate:
2400
2. Data length: 8
3. Parity:
N
4. Start position: 1
5. Stop position: 1
B. Control Code
1. Instructions for (up): 0xFF 0xAA 0xEE 0xEE 0xDD
2. Instructions for (stop): 0xFF 0xAA 0xEE 0xEE 0xCC
3. Instructions for (down): 0xFF 0xAA 0xEE 0xEE 0xEE
1. RS485B
2. RS485A
3. Manual control switch (up)
4. Manual control switch (stop)
5. Manual control switch (down)
6. Manual control switch public line
Adjustment
knob
Push tab
Tension string
Adjustment
knob
Screen material
Weight bar
