JA09252018
3
www.elitescreens.com
Installation Warning
Due to various installation environments, the instructions provided in thi
s user’s guide are for reference only.
Please consult a professional installation company for further installation and safety advice. The installer must
insure that proper mounting hardware is used to provide adequate strength suitable for the installation.
Individual modifications to this product are prohibited and will void the manufacturer warranty.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that the interference will not occur on a particular installation. If this equipment
causes harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
✓
Reorient or relocate the receiving antenna of the device that may be causing the interference.
✓
Increase the separation between the screen and the device’s receiver.
✓
Connect the equipment into a different power outlet other than the device.
Note
Fasteners included with this product are complimentary and may not be adequate for all mounting surfaces.
Consult with a professional installer or hardware store for proper mounting screws and anchors.
Regardless of the mounting method, the screen should be securely supported so that the vibration or pulling
on the viewing surface will not cause the casing to become loose or fall. The installer must insure that the
fasteners used are of adequate strength and suitable for the installation location.
Hardware Parts List for the Evanesce Tab-Tension B CineGrey 5D
Please make sure all parts listed below are included before proceeding with the installation.
A. Philips
screwdriver
x 1
B. Expansion bolts x 4
C. Lag bolts x 4
5/16” x 3”
D. M4x10 screws x 4
E. Ceiling Hanging
Brackets x 2
F. End cover caps x 4
G. End Covers x 2
185mmx80mm (7.3”x3.1”)
H. Threaded Rod x 4
M8x670mm (26.3” length)
I. Nuts for Threaded Rod x 12
(affixed to threaded rod)
