Elite Greenhouses TITAN K800, Instructions & Illustrations

Page: 4 / 36

PARTS LIST 6X8 8X8 10X8 12X8 14X8 16X8 18X8 20X8
1 50’ Glazing beading 1 0 1 0 1 0 1 0
2 100’ Glazing beading 2 3 3 4 4 5 5 6
3 Eave gusset plate 2 2 2 2 2 2 2 2
4
Brush draught excluder 2 2 2 2 2 2 2 2
5 Top door panel
Taped
together
and marked
door
2 2
2 2 2 2 2 2
6
Bottom door panel 2 2 2 2 2 2 2 2
7
Door infill panels 6 6 6 6 6 6 6 6
8
Door track support 1 1 1 1 1 1 1 1
9
Ridge
Taped
together
1 1 1 1 1 1 1 1
10 Gutter / Eave 1 1 1 1 1 1 1 1
11 Front cill 1 1 1 1 1 1 1 1
12 Heavy angle brace 1 1 1 1 1 1 1 1
13 Rear end glazing bar 3 3 3 3 3 3 3 3
14 Rear end cill 1 1 1 1 1 1 1 1
Taped
together
and marked
end
15 Rear end horizontal bracing angle 1 1 1 1 1 1 1 1
16 Rear end wall bar 1 1 1 1 1 1 1 1
17 Door end cill + ramp 1 1 1 1 1 1 1 1
18 Door end glazing bar 3 3 3 3 3 3 3 3
19 Door end horizontal bracing angle 1 1 1 1 1 1 1 1
20 Door end wall bar 1 1 1 1 1 1 1 1
21 Door glazing bars—handed/unhanded 2/2 2/2 2/2 2/2 2/2 2/2 2/2 2/2
22 Front glazing bars—marked front 2 3 4 5 6 7 8 9
23
Front diagonal angles 2 2 2 2 2 2 2 2
24 Corner bars—taped in two packs
1 = left end, 1 = right end 4 4 4 4 4 4 4 4
25 Short bracing angles marked door end 4 4 4 4 4 4 4 4
26 8’ shelf 1 1 1 1 1 1 1 1
27 Vent (in packs) 1 1 1 1 2 2 3 3
28 Louvre (in packs) 1 1 1 1 1 1 1 1
29 Door track 1 1 1 1 1 1 1 1
30 Roof glazing bars 2 3 4 5 6 7 8 9
31 Top hats (length of greenhouse) 2 2 2 2 2 2 2 2
32
The following items can be found in the bag of fittings or additional packages.
Skeleton gun, tube of silicon, rolls of foam seal, anchor brackets, stainless steel screws, plastic plugs, M6 nuts and bolts,
casement stays, stay pins, M4 pins, nuts and bolts, door lock, short and long self tapping screws, spring washers, door
wheels and fittings.
The parts list will alter slightly depending upon the position of the double doors. Above is on the assumption the door is in
the gable.