Elite Greenhouses TITAN K800, Instructions & Illustrations

Page: 27 / 36

INSTALLATION OF DOUBLE FRONT DOOR
1. Fit the door track to the main door track support before offering to the structure.
(Key point).
The door track has a continuous bolt channel in the flat section of the bar. Slide 3 bolts into the bolt
channel and line up with the 3 holes in the door track support. Loosely add the nuts and slide the
door track left or right so that it covers the area of the door in the open and closed position. Tighten
the nuts. For a front position door the two slotted holes that connect the door track support to the
two front glazing bars are facing
DOWNWARDS like a letter ‘n’. (Key Point).
2. Having decided where the door is positioned, install the door track support at the door opening
bay utilising the unoccupied bolts in the glazing bars. Fit the door track support below the gutter, as
high as possible.
3. The door track is now in position and ready for the addition of the doors.
4. Before fitting the door you must cut away the horizontal bracing angle using a hacksaw and metal
file, to afford access through the door opening. This may already be done prior to delivery.
5. Slide the left hand door from the left hand side and the right hand door from the right hand side,
(front door) or for gable doors, both doors must slide from the eaves.
6. The installation of the double door is now complete.
DOOR TRACK SUPPORT
TOP DOOR TRACK