Elite Greenhouses KENSINGTON 10 x 6, Manual

Page: 10 / 40

RIGHT HAND GABLE END FRAME
Please note that for the purpose of this plan, we have made the right hand gable end rear end (i.e.
not the door end), but it could just as easily be the left hand gable end. So please read this section
and the left hand gable end section with the alternative in mind.
From the main box you require:
1.
Set of corner bars marked RIGHT END CORNER BARS
2. Set of glazing bars, angle and
cill marked END
This contains
* Wall bar
* Bottom cill
* Glazing bars
* Horizontal bracing
angle
From the bag of assorted fittings
and fitting within the box, you will
require
* One eave gusset plate
* Nuts and bolts
* Coil of glazing bead
1. Split the tape holding the corner bars together and also the tape holding the glazing bar, angle
and cill. Slide glazing beading along the beading channel of the two outer grooves of the
corner bars.
(as seen in diagram)
N.B. See front of booklet for
component diagram key.
Procedure