28
English
In order to increase effi ciency, select the correct feed speed with this depending on the type and
thickness of the garden waste to be processed. The machine is equipped with a speed controller.
• You can use a rotary switch to adjust the feed speed (from 1 to 10). The datum position is as
indicated on the illustration.
• If you wish to stop material feed, simply move the control lever forwards.
• To remove what has already been fed in, move the control lever completely backwards towards
you.
• The discharge screw will continue to discharge at a constant speed. The anti-blocking system
has no effect on the operation of the screw. The discharge screw will only stop rotating if you
move the control lever for the feed mechanism to the “stop” position.
• The machine is equipped with an anti-blocking system that automatically interrupts the feed
as soon as the engine reaches a critical speed. This system intervenes autonomously so that the
operator only has to concern himself with feeding in garden waste.
• However, when feeding in long branches whose diameter comes close to the maximum diameter
that can be processed, it is recommended that you remain in the vicinity so that you can manu-
ally intervene if the machine is about to become blocked.
a. You can adjust the feed speed.
b. You can interrupt the feed yourself for a short period by moving the control lever forwards (3).
c. If necessary, you can pull the wood back by pulling the control lever backwards (1).
Summary of Contents for MA 018 010 130
Page 1: ...Megaprof M A N U A L...
Page 7: ...7 English...
