23
English
• Insert the start key.
• Select a low speed (1).
• Move the key to position 1 and check whether all lamps fl ash. This checks the operation of the
lamps.
• Then move the key between positions 1 and 2 until the lamp of the glow plug extinguishes (2
and 3).
• Turn the key further to position 2 so that the engine starts.
• Allow the engine to warm up for several minutes unloaded and adjust the speed to the desired
level (1).
Caution
When allowing the engine to warm up unloaded, select a speed where the belt
does not hit due to resonance.
Warning
The blade shaft is driven directly by the engine. The blades remain engaged. This
means that the machine becomes dangerous as soon as the engine starts run-
ning. The engine must therefore be switched off immediately if you encounter a
situation in which you no longer have control over the work.
Switching OFF the machine:
+
Summary of Contents for MA 018 010 130
Page 1: ...Megaprof M A N U A L...
Page 7: ...7 English...
